ABSTRACT
This research work assessed the strategies for effective material management in building construction sites. The objectives of this research were; to establish theoretical frame work on construction material management, to investigate the factors militating against effective materials management on construction site in Nigeria and to access professional’s perception on the measures to be put in place to ensure effective materials management in the construction industry in Nigeria. Various literatures were set-out to review the objectives in extensive forms to proffer deeper understanding. The research data were collected through questionnaires administered to the occupants of buildings in the study area, and the data collected were carefully assessed and analysed, and presented by the use of tables. From the findings, it was discovered that the theoretical frame work on construction materials management included; Material estimation, budgeting, planning & Programming, Scheduling, purchasing and procurement, Receiving and inspection, Inventory control, storage and Warehousing, Material handling and transport ad Waste management. The factors militating against materials management included; Sourcing of materials and requisition, Demand estimation, Transportation, Receiving and verification of materials on site, Storage of materials on site, Issuing of materials for use, Procurement for materials, Quality inspection and control, Maintenance, Time, Materials handling, Stock and waste control, Financial ability, Possession of qualified staff, Possession of qualified sub contractor, Possession of qualified of required equipment, Competence of estimators, Availability of equipment, Duration of the project, Type of Project, Types of materials and Level of awareness. From the study, the measures for effective materials management taken included; Timely Placing of orders for materials, Ensure quality assurance/control processes are in place, Logistics for tracking & transportation of materials to site, Receiving and inspecting materials on site, Storage and issuing of materials to construction location, Complete quality records of materials, Established material management system to be used, Documentation, Record receipt of goods upon delivery, Monitoring of materials distributed, e.t.c. Major Recommendations include; The contractors should ensure effective control of materials from design to construction stage so as to adequately reduce processes that can lead to wastages in construction, Construction firms need to evolve better means and facilities in which building materials could be well-stored with pallets at the base or as may be applicable to prevent undue damage which may lead to wastages, The designer should co-ordinate dimensions between materials specified during design and those procured for use at sites so as to guide site personnel on how to prevent avoidable waste in the use of various types of materials during execution of construction projects, The construction firms should create a functioning section that would see to the appraisal of the plan and compliance with its provisions through capacity building and manpower development, Material management should be practiced on all sites and by all categories of building construction firms, whether large, medium or small and There should be a proper planning of material management right from the inception of project execution and strict compliance with the project bill of quantities, schedule of materials, construction program, specification, proper stock accounting and security systems is essential so as to ensure timely project execution and standard work delivery within reasonable cost, time and quality.
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE STUDY
Material management can be defined as a process that coordinates planning, assessing the requirement, sourcing, purchasing, transporting, storing and controlling of materials, minimizing the wastage and optimizing the profitability by reducing cost of material. Baldva (1997) noted that Materials management is a process for planning, executing and controlling field and office activities in construction. While Eduardo (2002) viewed Materials management as the system for planning and controlling all of the efforts necessary to ensure that the correct quality and quantity of materials are properly specified in a timely manner, are obtained at a reasonable cost and most importantly are available at the point of use when required.
According to Khyomesh and Chetna, (2011) Building materials account for 60 to 70 percent of direct cost of a project or a facility, the remaining 30 to 40 percent being the labour cost.
Therefore, efficient procurement and handling of material represent a key role in the successful completion of the work. It is important for the project manager to consider that there may be significant difference in the date that the material was requested or date when the purchase order was made, and the time at which the material will be delivered. These delays can occur if the contractor needs a large quantity of material that the supplier is not able to produce at that time or by any other factors beyond his control. Chan (2002) noted that the project manager should always consider that procurement of materials is a potential cause for delay. The management of Construction processes to reduce, reuse, recycle and effectively dispose of wastes has a serious bearing on the final cost, quality, time and impact of the project on the environment. (Dania, 2007)
The goal of materials management is to ensure that construction materials are available at their point of use when needed. The materials management system attempts to ensure that the right quality and quantity of materials are appropriately selected, purchased, delivered and handled on site in a timely manner and at a reasonable cost, (khyomesh and chetna 2011). The scope of
materials waste is vast, and this waste occurs in the industry irrespective of the size of the building firm, instructions about handling, storage and stacking are not provided with the goods or sent in advance to the site (Abdulazeez, 2000).
Materials management in construction is also regarded as the efficient use of goods and equipment before, during and upon completion of a building process. Petra (2013) observed that Successful materials management requires the participation of all persons involved in a construction process. For Materials may deteriorate during storage or get stolen unless special care is taken. Delays and extras expenses may be incurred if materials required for particular activities are unavailable. Ensuring a timely flow of materials is an important concern of material management (Shah, 1993).
Thus, Materials management is an important element in project management. Materials represent a major expense in construction, so minimizing procurement costs improves opportunities for reducing the overall project costs. Poor materials management can result in increased costs during construction. On the other hand, efficient management of materials can result in substantial savings in project costs. If materials are purchased too early, capital may be held up and interest charges incurred on the excess inventory of materials (Wendy, 2006).
Johnston (2001) opined that Material Management is divided between head office and site in major construction companies. The selection, pricing, ordering, preparation of schedules and payment accounts are dealt with at head office, learning the receipt storage, protection and use of materials to management on site. Due to the high cost of materials, if not properly managed during the period of execution of contract can lead to abandonment of project.
In his submission, lan (2008), opined that the rate at which materials are been squandered on site due to poor management is getting too rampant in our society and if not curbed, it can jeopardize the future of our construction industry. This is particularly true in view of the fact that mismanagement of construction resources (i.e materials, plants and labour) affects the continuity and profit margin of such project and if not checked can lead to technical insolvency or bankruptcy.
Therefore, attention must be paid to how materials are been procured, stored and managed in order to achieve perfect work, effective handling of materials, right usage of materials and control of construction resources.
This, explain the reason why Johnston (2001), noted that Materials management begins with planning and estimation, these can be achieved through proper site co-ordination measure of reducing wastes, the location and security of materials on sites, procurement of quality materials as being specified and effective administration of site together with quality control.
Lee and Donald (2001), observed that the problem associated with the absence of proper materials management on construction site could be wastage of resources making contract cost more than budget sum, reduction of profit margin of the contractor ineffectiveness of project handlings reduction of output e.t.c. and if these are not properly taken care of it might be disastrous to the firm.
No construction project can commence and proved effective without an adequate supply of raw materials, apart from the careful planning of materials required by the builder, it is to his advantage to foster a good relationship with the suppliers, many of whom will have been selected due to their fulfillment of orders to the standard required and meeting of delivery times over a number of years (Pheng and Chuan, 2001).
Besides the builder’s own suppliers, the architect may specify that a certain supplier must be used and these are termed “nominated supplier” whatever the type of suppliers to be used, the information passed to them and receive from them is the same and in all but in the smallest firms this information and document will pass through the buyer. (Yang, et al., 2003).The buyer must also ensure that the architect receives any samples from the suppliers in the very early stage of contract procedure to satisfy him of the relative merits of the material. It may, for example, not be possible to obtain the specified material in time in conjunction with the building program, but by obtaining samples of similar products the architect may decide on a new form of construction or design to prevent hold ups.
In most cases, a buyer will send enquiries to two or three suppliers or in some cases, direct to manufacturers for such items as sand, gravel, brick, block, cement, e.t.c, regarding prices, delivery dates and such, for use at the estimating stage of the project. This will enable the estimator to use the figures obtained in the preparation of the tender figure.
To enable quick checks to be made on delivery or non-delivery of materials a card index system is generally adopted, this enables the purchasing or procurement department to keep a constant eye on the supplies. These cards contain all necessary information and are best filed in date offer for case of reference. Even when bulk delivers have been placed according to program, by taking the extra time and trouble to write out a card for each delivery the chance of losing sight of the delivery date is very much reduced, as regular checks will be on the file. As materials are received, the information will be recorded on the card.
Construction projects can be accomplished by utilizing management processes and these processes include planning, organizing, executing, monitoring, and controlling (Ahuja et al 1994 in Al Haddad 2006). During any construction project the three inter-related factors of time, cost, and quality need to be controlled and managed. Successful completion of projects requires all resources to be effectively managed. Prabu and Baker, (2006) regard Materials management as a means to achieve better productivity, which should be translated into cost reduction. For, according to Ademeso and Windapo (2008), poor planning and control of materials, lack of materials when needed, poor identification of materials, re-handling and inadequate storage cause losses in labor productivity and overall delays that can indirectly increase total project costs. Effective management of materials can reduce these costs and contribute significantly to the success of the project.
Materials management functions include planning and taking off materials, vendor evaluation and selection, purchasing, expenditure, shipping, material receiving, warehousing and inventory, and material distribution. (Narimah 2011), Almost 60% of the total working capital of any industrial organization consists of materials costs (Dey, 2001). Materials management can only produce what it should with the right quantities of the right material at the right time (Arnold and Chapman 2004). Thus, any improper handling and managing of materials will cause a huge effect on the total project cost, time and quality. There is a need to explore on the area of materials management, the issues relating to materials management problem.
1.2 STATEMENT OF THE PROBLEM
The present state of the building construction industry in Nigeria reflects various problems ranging from delays in project execution/delivery, substandard work, disputes, to cost and time overrun as a result of material shortage and wastages on sites, theft and displacement of materials on sites, as well as poor accounting and security system of the concerned sites/firms (Adafin, 2011). According to Dahiru (2010), lack of materials not only causes delays, but a consequent decrease in productivity and resulting to cost overruns. This is no doubt lack of effective material management is one of the major cause of this problem. Failure of the project manager to make available materials need could lead to delay. Non-compliance strictly with project bill of
quantities, schedule of materials, specifications and construction program in material stock control practice is another contributing factor which tends gradually to decrease profitability of a project also often leads to extension of time respectively, and hence no proper material stock control practice (Inyang Udoh, 2002). Besides that, Dey (2001) noted that the rate at which materials are being wasted due to improper management is becoming unbearable to the contractors due to its effect on their profit margin and proper usage of material to achieve quality job been done through various techniques.
1.3 AIM AND OBJECTIVES
The aim of the research is to ensure effective material management in order to reduce cost and time overruns, and to ensure good quality standards.
The specific objectives of this research are;
1. To establish theoretical frame work on construction material management.
2. To investigate the factors militating against effective materials management on construction site in Nigeria.
3. To access professionals perception on the measures to be put in place to ensure effective materials management in the construction industry in Nigeria.
1.4 RESEARCH QUESTIONS
The following are the research questions as related to this study.
1. What are the principle and procedures of good construction materials management?
2. What are the factors militating against effective materials management on construction sites in Nigeria?
3. What are the measures to be put in place to ensure effective materials management in construction sites in Nigeria?
1.5 SCOPE AND DELIMITATION
This work focused on materials management practices in Nigeria’s construction sites. The study covered factors militating against materials management, measures for effective materials management on construction firms. The study was limited to only building construction sites in Lagos, Abuja and Kaduna, therefore not all the country was covered. Site waste management was not part of this research.
1.6 JUSTIFICATION/SIGNIFICANCE OF THE STUDY
A major part of professional builder’s responsibility in building production management entails the selection, purchase, testing, storing and use of construction materials. As noted earlier, materials are a major expense in construction, thus the ability of contractor to manage his team and the flow of supplies are absolutely necessary for the successful project delivery and profit maximization. This requires the architects and engineers to specify exact supplies during preconstruction to avoid overstock. The construction management team is required to buy the correct amount of material at the right time to avoid cash flow, storage and deterioration problems. Subcontractors need to keep track of inventories, while suppliers are required to deliver as ordered and on time. The post-construction team has to evaluate remaining materials for reuse and recycling purposes.
However, this is not easy; First, if materials are purchased early, capital may be tied up and interest charges incurred on the excess inventory of materials. Even worse, materials may deteriorate during storage or be stolen unless special care is taken. For example, electrical equipment often must be stored in waterproof locations. Second, delays and extra expenses may be incurred if materials required for particular activities are not available. Accordingly, ensuring a timely flow of material is an important concern of project managers. (Harris and MacCaffer, 2001)
Thus, to determine the misery behind proper materials management in construction sites in Nigeria, so as to guide against project delay and abandonment, also to create a standard method based on size of construction site to control cost of contract and materials wastage. It is not only desirable but necessary to undertake careful study of material management. Additionally, since Proper material management will benefit the firm in terms of increase profit margin, quick execution and reduce cost of the project. This brings the need for an evaluation of materials management in Nigeria construction industry.
================================================================
Item Type: Project Material | Size: 67 pages | Chapters: 1-5
Format: MS Word | Delivery: Within 30Mins.
================================================================
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.